G6-Epoxy G6E-P is a two component electrically conductive epoxy for high performance bonding, sealing and coating. We use a proprietary mix of high-performance carbon filler to achieve superb electrical properties for a non-metallic electrically conductive epoxy. It can cure at room temperature or more rapidly at elevated temperatures. The optimum cure schedule is overnight at 25°C followed by 4 hours at 80°C. G6E-P has a thick paste consistency after mixing and bonds well to a wide variety of substrates including metals, composites, ceramics, and glass.
- Non-magnetic; carbon filled
- Good electrical conductivity: <10 Ohm·cm
- Ultralight: density is less than 1.1 g/cm3
- Low-cost silver alternative
- Excellent gap-filling adhesive
TWO COMPONENT SYSTEM: Part A – Black paste, Part B – Black paste
THE MIX RATIO: 100 (Part A) to 50 (Part B) by weight.
CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following schedules: 24 hours @ 25°C, 5 hours @ 80°C or 2 hours @ 120°C
POT LIFE: 2-3 hours
GLASS TRANSITION TEMPERATURE: 70°C
MIXED VISCOSITY: 450-550 Pa·sec at 25°C/77°F
HARDNESS, SHORE: >75 D
VOLUME RESISTIVITY: <10 Ohm x cm
DENSITY: 1.0 -1.1 g/cm3
STORAGE & SHELF LIFE: 12 months at 25°C, in unopened, unmixed containers. Stores and ships at room temperature. No freezing or dry ice required.
MIXING INSTRUCTIONS: Add Part B to Part A and mix slowly until uniform in separate container. Vacuum degassing is recommended.
SAFETY & HANDLING: Please always read the SDS before use. Use the product with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
PACKAGING: Part A (packaged in a jar) and Part B (packaged in a jar). G6E-P can be also packaged in various sizes and units to accommodate customer's requirements.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.