G6-FXSG is a flexible, two-component, electrically-conductive high-performance adhesive well suited for bonding dissimilar materials that are likely to be subjected to vibrations, temperature variations, shock from impact, bending, and mechanical stress. We use a proprietary mix of silver and graphene materials to formulate an adhesive with an outstanding combination of flexibility and low electrical resistivity. Graphene adds superior durability, fatigue and crack resistance along with low electrical resistance.
Flexible Silver/Graphene Epoxy G6E-FXSG is a two-component adhesive for high-performance bonding, sealing and coating purposes. G6E-FXSG has a smooth, paste-like consistency after mixing and bonds well to a wide variety of substrates including metals, composites, ceramics, glass and plastics. This product is recommended for flexible electronics, membrane switches, medical devices, electronic packaging applications such as die attachment and solderless interconnections, component repair and display interconnections.
- Silver/Graphene filled epoxy
- Flexible after curing
- Electrical conductivity, volume resistivity: ≤ 0.0005 Ω·cm
- Tough and durable
- Perfect for die attachment and solderless interconnections
TWO COMPONENT SYSTEM: Part A – smooth thixotropic silver paste, Part B – smooth thixotropic silver paste.
THE MIX RATIO: 100 (Part A) to 100 (Part B) by weight.
CURING INSTRUCTIONS: Best results are obtained when product is cured at one of the following schedules:
- 24 hours @ 25°C/77°F
- 3 hours @ 80°C/176°F
- 45 min @ 150°C/302°F
POT LIFE: 1 hour
GLASS TRANSITION TEMPERATURE: 28°C/82°F (cured at 80°C/176°F)
MIXED VISCOSITY: 110 – 125 Pa·s at 25°C/77°F
HARDNESS, SHORE: >40A
DENSITY: Part A 2.9 - 3.0 g/cm3
Part B 2.7 - 2.9 g/cm3
VOLUME RESISTIVITY: ≤ 0.0005 Ω·cm (cured at 150°C/302°F)
<0.001 Ω·cm (cured at 80°C/176°F)
THERMAL CONDUCTIVITY: 2 W/m•K at 25°C/77°F
STORAGE & SHELF LIFE: 12 months at 25°C/77°F in unopened, unmixed containers. Stores and ships at room temperature. No freezing or dry ice required.
MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A in a separate container and mix slowly until uniform.
SAFETY & HANDLING: Always read the SDS for both Part A and Part B before use. Use it with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from the skin.
PACKAGING: Part A and Part B are packaged in individual jars. Packaging, especially jar sizes and contained quantities, can be customized according to customer requirements.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.