G6E-HRSG High Temperature Room Temperature Curing Silver/Graphene Conductive Epoxy

Graphene SupermarketSKU: G6E-HRSG-30G

Size: 30g (25g + 5g)
Price:
Sale price$90.00

Description

G6E-HRSG epoxy is intended for applications requiring a high-performance bond or connection of electrically conductive components/materials which operate at higher temperatures and require low electrical resistivity.

G6E-HRSG cures at room temperature which eliminates the necessity for a heating oven, but still maintains a high operating temperature. This allows for an easier and safer bond/connection of conductive components or materials. Graphene filler adds superior durability, fatigue, and crack resistance along with low electrical resistance. OPERATING TEMPERATURE: up to 260 0C (500F)

KEY FEATURES

  • Non-magnetic
  • Low electrical resistivity: <3x10-4 Ohm·cm
  • Room Temperature curing
  • Good solvent and chemical resistance

TYPICAL APPLICATIONS:

  • Photovoltaic (Solar) Cells
  • Casting, Coating & Encapsulation
  • EMI / RFI Shielding
  • Display Packaging / Bonding
  • Temperature Sensitive Electronics
  • Medical Devices / Sensors 

PRODUCT INFORMATION

TWO COMPONENT SYSTEM: Part A – silver paste, Part B – silver paste.

THE MIX RATIO: 5 (Part A) to 1 (Part B) by weight

POT LIFE: 30 min

CURING INSTRUCTIONS: Best results are obtained when the product is cured as follows:

  • 8-10 hours @ 25°C / 77°F
  • 30 minutes @ 80°C / 140°F
  • 10 minutes @ 150°C / 302°F

DENSITY: Part A 2.9 - 3.1 g/cm3

  Part B 2.8 - 3.1 g/cm3

MIXED VISCOSITY: 300 - 350 Pa·s @ 25°C / 77°F

SPECIFICATIONS OF CURED MATERIAL:

HARDNESS, SHORE: >70 D

GLASS TRANSITION TEMPERATURE: 137 °C/ 279 °F

FLEXURAL MODULUS: 2.7-3.2 GPa at 25°C

LOSS MODULUS: 100-130 MPa at 25°C

 

VOLUME RESISTIVITY: < 3x10-4 Ω·cm at 150°C curing temperature 

STORAGE & SHELF LIFE: 6 months @ 25°C / 77°F in unopened, unmixed containers. Stores and ships at room temperature. No freezing is required.

MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A and mix slowly until uniform in a separate container.

SAFETY & HANDLING: Always read the SDS for both Part A and Part B before use. Use the product with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.

PACKAGING: Part A and Part B (packaged in individual jars). This epoxy can also be supplied with various packaging options, according to customer needs.

 

Datasheet

Download Technical Data Sheet

Download Safety Data Sheet

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed